The M760 DHBS Drag Feed Shovel with hydraulic skip loader is a fantastic time and labour-saving machine.
Using a built-in remote-control, the drag feed shovel can load the sand into a hydraulically operated skip at the rear of the machine. With the push of a lever the skip is lifted vertically, and the sand is loaded directly into the empty vessel.
The need to manually shovel sand from the ground into the machine is eliminated, significantly reducing risk of strain to the operator's arms and back.
The time taken between screed deliveries from the pump is greatly reduced, as materials are gathered and prepared to be loaded straight into the machine whilst the screed pump is pumping its previous load to its required destination. Output is increased by 25% from 4 cubic metres to 5 cubic metres per hour.
Although this machine can be used in various work situations it is more suited to larger jobs where a semi-permanent work station can be established.
Specifications: | |
Output | 5 m³/h |
Delivery pressure | 7 bar |
Delivery horizontal reach | App. 200 m |
Delivery vertical reach | App. 50 storeys |
Compressor | 5.33 m³/min; control pressure 7 bar |
Drive engine | BF3M Diesel engine 47kW |
Weight | 2000kg |
Filling height | 600mm |
Max grain | 16mm |
Length | 4500 mm over all |
Width | 1500mm |
Height | 1450mm (2410 mm with skip set vertically) |
Noise level | 104db |